SCHEDA TECNICA/ TECHNICAL DATASHEET
VALVOLE DI BLOCCO E CONTROLLO DISCESA A DOPPIO
EFFETTO – TIPO A
DOUBLE OVERCENTRE
VALVES – TYPE A
Valvola utilizzata per controllare il movimento e
il blocco dell’attuatore in entrambe le direzioni
realizzando la discesa controllata del carico che
non sfugge trascinato dal proprio peso, in quanto la
valvola non consente alcuna cavitazione dell’at-
tuatore. Il tipo “A” si differenzia dal tipo “ non A”
per la posizione degli attacchi e per il rapporto di
pilotaggio.
SCHEMA IDRAULICO
PERDITE DI CARICO
VBCD 1/4 - 3/8 - 1/2 DE/A VBCD 3/4 DE-A VBCD 1 DE-A
HYDRAULIC DIAGRAM
PRESSURE DROPS CURVE
These valves are used to control actuator’s move-
ments and block in both directions in order to have
a under control descent of a load; load’s weight
doesn’t carry it away, as the valve prevents any
cavitations of the actuator. The A type is different for
the ports position and the pilot ratio.
USE AND OPERATION:
Collegare V1 e V2 all’alimentazione e C1 e C2
all’attuatore da controllare. Il montaggio è in linea.
• pressione di taratura diversa da quella standard.
• piombatura (CODICE/P) o predisposizione alla
piombatura (CODICE/PP).
Connect V1 and V2 to the pressure ow, C1 and C2
to the actuator to be controlled. In-line mounting.
A RICHIESTA
• other settings available
• sealing cap (CODE/P) and arranged for sealing
cap (CODE/PP)
TIPO / TYPE
VBCD DE A
Corpo: acciaio zincato
Componenti interni: acciaio temprato termicamente e
retticati
Guarnizioni: BUNA N standard
Tenuta: tralamento trascurabile
Taratura standard: 320 Bar
La taratura della valvola deve essere almeno 1,3 volte
superiore alla pressione indotta dal carico per consentire
alla valvola di chiudersi anche quando sottoposta alla
pressione corrispondente al carico massimo.
Body: zinc-plated steel
Internal parts: hardened and ground steel
Seals: BUNA N standard
Tightness: minor leakage
Standard setting: 320 Bar
Valve setting must be at least 1,3 times more than
load pressure in order to enable the valve to close
even when undergone to maximum load pressure
Temperatura olio: 50°C - Viscosità olio: 30 cSt
Oil temperature: 50° C - Oil viscosity: 30 cSt
3.4
MATERIALS AND FEATURES:
APPLICATIONS:
MONTAGGIO:
ON REQUEST
MATERIALI E CARATTERISTICHE:
IMPIEGO:
Δ
Δ
Δ
P (BAR)
P (BAR)
P (BAR)
FLOW - Q (l/min) FLOW - Q (l/min) FLOW - Q (l/min)
C2 V2
C2 V2 C2 V2
V2 C2
V2 C2
V2 C2
C1 V1
C1 V1 C1 V1
V1 C1
V1 C1
V1 C1